User manual

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
Chapter 5 Upgrading Software on the Dynamix DW-Phone LP-
201 SIP-Phone
Dynamix DW-Phone LP-201 supports three methods to upgrade the new version. All
methods are necessary to prepare the TFTP or FTP program on the host PC as TFTP/FTP
server. After installing TFTP/FTP program on one PC and connecting to network,
Dynamix DW-Phone LP-201 is ready to be upgraded.
1. LCD Panel Control
2. Remote Control: Telnet
3. Web Management
1.From LCD Phone Menu
Please choose the 6 → 2 selection-Firmware Upgrade. Press OK to enter into the
sub-selection as below.
1. Firmware Update
(1) Download method
There are two methods to download new version file, please move the
“>“ symbol by press  or  on the keypad to select TFTP or
FTP method, then press OK to confirm it.
(2) FTP/TFTP Sever
User has to offer one TFTP/FTP server IP Address and set this IP
Address via keypad. The IP Address is necessary for upgrading
Dynamix DW-Phone LP-201 new application rom file.
(3) FTP Account
User has to input user name for FTP server login .It is necessary for
upgrading Dynamix DW-Phone LP-201 new application rom file via FTP
method.
(4) FTP Password
User has to input password for FTP server login .It is necessary for
upgrading Dynamix DW-Phone LP-201 new application rom file via FTP
method.
(5) File Name
User has to press the file name of new application rom file prepared for
upgrading
(6) Application Version
Show versions of application software.
Note:
Download via LCD command can only upgrade new application rom file.
59