User manual

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
18. [vlan] command
1. -print: display current VLAN configuration settings.
2. -dev: enable/disable VLAN configuration.
3. –vid: set CPU VLAN ID number.
4. –pcvid: set PC port VLAN ID number.
Note: Only when vid numbers are the same, network can connect. For example, if PC A
connect to PC port of SIP Phone A, and vid of pcvid are different, this PC can’t reach this
SIP Phone, however, if PC B connect to SIP Phone B, and pcvid of SIP Phone B is the
same with vid of SIP Phone A, PC B can reach SIP Phone A.
N
N
E
E
T
T
PC A
PCVID:1
SIP PHONE A
VID:2
SIP PHONE B
PC B
PCVID:2
5. –priority: set CPU packets priority number.(From 0 to 7, 7 is the highest priority.)
6. –pcpriority : set pc port priority number. (From 0 to 7, 7 is the highest priority.)
7. –pcdroptag: enable/disable pc port drop tag function. If this function is enabled,
SIP Phone will drop priority tag on packets sending out from PC port.
55