User manual

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
13. [sip] command
1. –print: display all current configurations.
2. –mode: configure Dynamix DW-Phone LP-201 as Proxy or Peer-to-
Peer Mode. Usage: sip –mode 0/1(1 for Proxy mode, 0 for Peer-to
Peer mode)
3. –px: set proxy server IP address or URL address (sip –px “IP address or URL of
Proxy server”).
4. –pxport: set listening port of Proxy server.
5. –outpx: set IP address of outbound proxy server. After user set outbound proxy, all
packets form Dynamix DW-Phone LP-201 will be sent to outbound proxy server.
6. –prefix: set prefix string. If user ID contains alphabets, user can set it as prefix
string here. For example, if Account Name is 123, Dynamix DW-Phone LP-
201 will sent out messages as Account Name @”IP address of Proxy”, if user
set prefix as abc, Dynamix DW-Phone LP-201 will set out as abc123@”IP address
of Proxy”. This function is for special proxy server.
7. –line: identify one number for the Dynamix DW-Phone LP-201 to register to the Proxy
(SIP –line “line number”).
Note: In proxy mode please remember to set user account information under
security command.
8. –pbsearch: enable/disable phone book search function under Proxy Mode. If user
enabled this function, Dynamix DW-Phone LP-201 will search dialed number in phone
book to see if there is any matched table before send to Proxy server, and if there is a
matched data in phone book, Dynamix DW-Phone LP-201 will make call to related IP
address.
49