User manual

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
10. [pppoe] command
1. -print: display all current configurations and information.
2. –id: to set PPPoE authentication user name.
3. –pwd: to set PPPoE authentication password.
4. –reboot: Choose enable or disable this function. If user enables this function, after
PPPoE disconnected, Dynamix DW-Phone LP-201 will automatically reboot to re-
connect, and after reboot, if Dynamix DW-Phone LP-201 still can’t connect with
server, Dynamix DW-Phone LP-201 will keep trying to connect. On the other hand, if
user disables this function, Dynamix DW-Phone LP-201 won’t reboot and keep trying
to connect. (pppoe –reboot 0/1)
5. –echo: Enable or Disable PPPoE Echo function. If user enabled this feature, SIP
Phone will send out echo request to check PPPoE connection status. Please notice
that if user disables this function, SIP Phone cannot detect if PPPoE connection is
still alive or not. (pppoe –echo 0/1)
11. [flash] command
This command will clean the configuration stored in the flash rom to default value and
reboot the SIP-Phone.
Note:
1. After user upgrade new software version, suggested to execute this command to
make sure new software work well on SIP-Phone.
2. To execute the command flash –clean, all configuration of Dynamix DW-Phone
LP-201 stored in flash will be cleaned. It is authorized for the user whose login
name is “root” only.
47