User manual

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
9. -ipsharing: If Dynamix DW-Phone LP-201 is behind an IP-sharing, user must enable
IP sharing function and specify public IP address. (ifaddr –ipsharing 0/1 “public IP
address of IP sharing”, 0 for disable and 1 for enable)
Note:
Some Proxy servers support endpoint behind NAT function, in this case Dynamix
DW-Phone LP-201 doesn’t have to enable IP sharing function, please contact with
your Proxy Server vendor.
10. –upnp: enable/disable UPnP function. If the IP sharing or NAT device supports
UPnP, user can enable UPnP function so that Dynamix DW-Phone LP-201 will
automatically connect with NAT device without configuration in SIP Phone and NAT
device.
11. –server: set EMS server IP address.
12. –id: set EMS login user ID.
13. –pwd: set EMS login user password.
14. –emstime: set EMS server recycle time.
46