User manual

Dynamix DW-Phone LP-201 SIP IP Phone

User Manual

8. [time] command

When Dynamix DW-Phone LP-201 enables SNTP function and be able to connect

with SNTP server, type time command will show the current time retrieved from

SNTP server.

9. [ifaddr] command

Configure and display the Dynamix DW-Phone LP-201 IP information.

1. –print: print out all current configurations of ifaddr command.

2. -ip, -mask, -gate: Set Dynamix DW-Phone LP-201 IP Address, subnet mask and

default gateway respectively.

5. -ipmode: Set Dynamix DW-Phone LP-201 network mode to be Fixed IP, DHCP or

PPPoE.

When User set IP mode to be fixed IP, please set IP, subnet Mask, default gateway

as mentioned in item 2.

If User set IP mode to be DHCP, Dynamix DW-Phone LP-201 will search for DHCP

server to capture IP address after reboot.

If user set IP mode to be PPPoE, please remember to set related parameters under

[pppoe] command.

6. -sntp: When SNTP server is available, enable SIP-Phone SNTP function and

assign SNTP server IP address so that Dynamix DW-Phone LP-201 can capture

current time from SNTP server. (ifaddr –sntp 1 “xxx.xxx.xxx.xxx”)

7. -dns: User can set Domain Name Server IP address. Once Dynamix DW-Phone LP-

201 can connect with DNS server, user can specify URL address instead of IP

address for Proxy Server and phone book IP address...etc.

8. –timezone: User can set different time zone according to the location Dynamix DW-

Phone LP-201 is. For example, in Taiwan the time zone should be set as 8,which

means GMT+8. (GMT-8: ifaddr –timezone -8)