User manual

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
Chapter 4 Configuring the Dynamix DW-Phone LP-201 through
Telnet command lines
After setting the IP Address of Dynamix DW-Phone LP-201 and reboot, (please refer to LCD
Menu: 5-3.4.5), user can enter into Telnet command lines.
Note:
1. After user enter Dynamix DW-Phone LP-201 configuration via telnet, please
use login: ”root”, password: null, press enter to enter command lines. If user
forgets password, please contact with the distributor, we will generate a
specific password according to your MAC address of SIP-Phone.
2. User must input lower-case command, but contents of configurations such as SIP
alias or user name etc, user can set as capital case.
3. After any change of configuration, please remember to do commit command to
save changes and then reboot command to reboot system.
1. [help] command
Type help or man or ? to display all the command lists. The following figure is shown
all commands of SIP-Phone.
42