User manual

Dynamix DW-Phone LP-201 SIP IP Phone

User Manual

4. PPPoE Configure

Please refer to chapter 4.11[pppoe] command

- User Name: Set PPPoE authentication User Name.

- Password: Set PPPoE authentication password.

- Reboot After Remote Host Disconnection: Enable/Disable auto reboot after PPPoE

disconnection

If user enables this function, after PPPoE being disconnected, Dynamix DW-

Phone LP-201 will automatically reboot to re-connect, and after reboot, if

Dynamix DW-Phone LP-201 still can’t get contact with server, Dynamix DW-

Phone LP-201 will keep trying to connect. After re-connected, Dynamix DW-

Phone LP-201 will also restart system. On the other hand, if user disables this

function, Dynamix DW-Phone LP-201 won’t reboot and keep trying to connect.

- PPPoE Echo: Enable or Disable PPPoE Echo function. If user enabled this feature,

SIP Phone will send out echo request to check PPPoE connection status. Please

notice that if user disables this function, SIP Phone cannot detect if PPPoE

connection is still alive or not.

- Other items: for reference only, cannot allow to be configured.