Manualshelf

User manual

ManualsBrandsDynamix ManualsComputer equipment201
31323334353637383940
Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
3. System Configuration
Please refer to chapter 4.12 [sysconf] command
- Keypad DTMF Type: set DTMF type. User can select DTMF type SIP-Phone
transmits.
- RFC2833 Payload Type: change RFC2833 Payload type. This is for special request
from the other site, if RFC2833 payload types of 2 sites are different, it may cause
some problem of connection.
- Inter Digit Time: Set the DTMF inter digit time (second)
To set the duration (in second) of two pressed digits in dial mode as timed out. If
after the duration user hasn’t pressed next number, Dynamix DW-Phone LP-
201 will dial out all number pressed.
- End of Dial Digit: select end of dialing key, e.g. set end of dial key as * button, after
finished pressing dialing number then press * will dial out.
31