User manual

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
2. SIP Information
Please refer to chapter 4.13 [SIP] command
- Run Mode: Select Dynamix DW-Phone LP-201 to work under Peer-to-Peer mode or
Proxy mode.
- Proxy IP Address: Set Proxy IP Address or URL address (Domain Name Server
must be configured. Please refer to Network Interface).
- Outbound Proxy: Set IP Address or URL address (Domain Name Server must be
configured. Please refer to Network Configure) of outbound Proxy server.
- Proxy port: Set Proxy port for Dynamix DW-Phone LP-201 to send message, default
value is 5060, if there is no special request of Proxy server, please don’t change this
value.
- Phone Book Search: enable/disable phone book search function. If user enabled
this function, Dynamix DW-Phone LP-201 will search dialed number in phone
book to see if there is any matched table before send to Proxy server, and if
there is a matched data in phone book, Dynamix DW-Phone LP-201 will make
call to related IP address.
- Prefix String: set prefix string. If user ID contains alphabets, user can set it as prefix
29