User manual

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
1. Network Interface
Please refer to chapter 4.7 [ifaddr] command.
- IP Address: Set IP Address of SIP-Phone
- Subnet Mask: Set the Subnet Mask of SIP-Phone
- Default routing gateway: Set Default routing gateway of SIP-Phone
- Get IP Mode: User has to set Dynamix DW-Phone LP-201 to use which network
mode.
1. Fixed IP: User has to assign a fixed IP to SIP-Phone.
2. DHCP: When DHCP function enables, Dynamix DW-Phone LP-201 will
automatically search DHCP server after reboot.
3. PPPoE: If Dynamix DW-Phone LP-201 is working with PPPoE connection,
user have to set related parameters in “PPPoE Configure “page.
Note:
If User set “Get IP mode” as DHCP or PPPoE, IP address, Subnet Mask, and
Default routing gateway will become 0.0.0.0 and not allow to be configured.
26