User manual

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
8. SNTP Configuration
(1) SNTP Mode:
User can set SNTP function to be on or off, which means Dynamix DW-
Phone LP-201 will capture current time from SNTP server or not.
(2) SNTP Server:
User can specify a SNTP server for Dynamix DW-Phone LP-201 to capture
current time.
(3) Time Zone:
User can set time zone via pressing  or  according to the
location Dynamix DW-Phone LP-201 is. For example, in Taiwan the
time zone should be set as GMT+8:00.
9. Behind IP-Sharing
(1) If Dynamix DW-Phone LP-201 is behind IP sharing or NAT device, on
IP sharing must enable “DMZ” function or set “Virtual Server” to open
ports (UDP port: 5060 and 16384).
(2) User must enter public IP address of IP sharing.
6. Advanced Settings (protected by password)
 Please Enter Password:
User must key in password to enter this menu, selections under this
command are all important ones, which can only be configured by advanced
users.
Note:
1. Default Password is empty, user can enter this sub-menu directly, once
password has been set in 3.LCD Menu password, user must input
password before enter this sub-menu.
2. If user forget password, please contact with the distributor, we will
generate a specific password according to your MAC address of
SIP-Phone.
3. User can also try to configure Dynamix DW-Phone LP-201 via Telnet or
Web browser with default IP address: 10.1.1.3. (This only works when
default IP address hasn’t been changed.)
1. SIP Settings
(1) Connect Mode
Select SIP connection mode to be peer-to-peer mode or Proxy mode.
19