User manual

Dynamix DW-Phone LP-201 SIP IP Phone

User Manual

5. Network

1. Information

User can press





to check current network status:

(1) Mode: Display current network connection mode of Dynamix DW-

Phone LP-201 to be Static (Fixed IP), DHCP, or PPPoE.

Note:

When Dynamix DW-Phone LP-201 is under DHCP mode, then

change to Static mode, the following items: IP address, Subnet

Mask, Default Gateway, will display empty, after reboot, user can see

information again.

(2) IP, Mask, Gateway: display current IP information.

2. Network Mode

Set network mode of Dynamix DW-Phone LP-201 to be Static (Fixed IP),

DHCP, or PPPoE.

3. IP address

Set IP address of SIP-Phone.

4. Subnet Mask:

Set subnet mask address of SIP-Phone.

5. Default Gateway

Set default gateway address of SIP-Phone.

6. Domain Name Server

Set IP address of Domain Name Server. Once Dynamix DW-Phone LP-

201 can connect to DNS server, user can set URL address for Proxy

server or Phone book instead of IP address.

7. PPPoE Configuration

(1) User Name

Set PPPoE connection authentication user name.

(2) Password

Set PPPoE connection authentication password.

(3) Auto Re-connect

Choose ON or OFF to enable or disable this function. If user enables this

function, after PPPoE disconnected, Dynamix DW-Phone LP-201 will

automatically reboot

to re-connect, and after reboot, if Dynamix DW-Phone LP-201 still can’t

connect with server, Dynamix DW-Phone LP-201 will keep trying to

connect. On the other hand, if user disables this function, Dynamix DW-

Phone LP-201 won’t reboot and keep trying to connect.