User manual

Dynamix DW-Phone LP-201 VoIP Phone
Chapter 5 Upgrading Software on the Dynamix DW-Phone LP-
201
Dynamix DW-Phone LP-201 supports three methods to upgrade the new version. All
methods are necessary to prepare the TFTP or FTP program on the host PC as TFTP/FTP
server. After installing TFTP/FTP program on one PC and connecting to network, Dynamix
DW-Phone LP-201 is ready to be upgraded.
1. LCD Panel Control
2. Remote Control: Telnet
3. Web Management
＊Download Procedure
1.LCD Panel Control
1.Choose the 1 → 3 selection-Firmware Upgrade. Press OK to enter into the
sub-selection as below.
2.Download method
There are two methods to download new rom file, please move the “ → ”
symbol by press ³ or ´ on the keypad to select TFTP or FTP method,
then press OK to confirm it.
3.Set File Server IP
User has to offer one TFTP/FTP server IP Address and set this IP Address on
the VoIP keypad. The IP address is necessary for upgrading Dynamix
DW - Phone LP-201 new application rom file.
4.Set FTP user account
User has to press user name and password for FTP server login. It is
necessary for upgrading Dynamix DW - Phone LP-201 new application rom file
in FTP method.
5.Indicate file name
User has to press the file name of new application rom file prepared for
upgrading
6.Start Download
Press OK to start download new application rom file.
7.Firmware Version
Show versions of all rom files.
Note:
1.Download via LCD command can only upgrade new application rom file.
2.If Dynamix DW - Phone LP-201 fails to upgrade via LCD menu,
Dynamix DW - Phone LP-201 will automatically reboot.
66