User manual

Dynamix DW-Phone LP-201 VoIP Phone

18. [bureau] command

Type bureau can display commands below.

1. -print: display bureau line information and configuration.

2. -hold: set hold tone generation on or off. If other terminals support H.450 hold

function, and execute hold function when connecting with Dynamix DW-Phone LP-201

, user will hear hold tone from Dynamix DW-Phone LP-201 . (0 for off,1 for on)

19.[rom] command

1. -print: show versions of all rom files.

2. -app,-boot, -dsptest, -dspcore, -dspapp, -rbpcm and -htpcm: upgrade main boot

code, main application code, DSP testing code, DSP kernel code, DSP application

code, Ring Back Tone PCM file and Hold Tone .

Note: After upgrade Application, please remember to execute flash –clean

command, which will clean all configurations become factory values except IP

address.

3. -boot2m: to upgrade 2mb rom file, which includes all firmware file mentioned in item