User manual

Dynamix DW-Phone LP-201 VoIP Phone

frequency and related items as 0. Furthermore, unit of on/off time is 10 ms, and

suggest keeping level as default value (8). User can also increase the value of level to

increase the volume.

17. [support] command

1. -print : display current SUPPORT values configurations.

2. -fstart: enable or disable fast start (support –fstart 0/1 , 0 for disable and 1 for

enable.)

Note: When fast start function is enabled, if user wants to send DTMF message after

connection, Dynamix DW - Phone LP-201 will send out Q.931 message. (Please refer to

4.11 sysconf –keypad command, which can only set keypad as q.931 message at this

time)

3. -tunnel: enable or disable H.245 tunnel function.(support –tunnel 0/1 , 0 for disable

and 1 for enable)

4. -h245fs:set if open H.245 separate channel after fast start or not. (support –h245fs

0/1 , 0 for open and 1 for not.)