User manual

Dynamix DW-Phone LP-201 VoIP Phone
♦ Number 1 –10, * and #: The function is as the same as the general phone set.
Corresponding list of keypad and symbol:
1 “1”
2 “A” ; “ B” ; “C” ; “2”
3 “D” ; “E” ; “F” ; “3”
4 “G” ; “H” ; “I” ; “4”
5 “J” ; “K” ; “L” ; “5”
6 “M” ; “N” ; “O” ; “6”
7 “P” ; “Q” ; “R” ; “S” ; “7”
8 “T” ; “U” ; “V” ; “8”
9 “W” ; “X” ; “Y” ; “Z” ; “9”
* “.” ; “@” ; “_” ; ”-“ ; “,” ; “!” ; “?” ; “*”
0 “0” ; “Space”
# “#”
♦ MUTE: Mute the voice of MIC and let others can’t hear from user in communication.
♦ PSTN: Press PSTN to switch Dynamix DW-Phone LP-201 as PSTN or IP Phone Mode.
In PSTN mode, “PSTN” characters will be displayed on LCD left bottom side, then users
can dial out as if standard telephone set in PSTN; in IP Phone mode, “GK” characters
will be displayed on LCD left bottom side.
Note:
1. When Dynamix DW - Phone LP-201 VoIP is in PSTN mode, only PSTN and
SPEAKER function key can work.
2. On LCD will display ”…Incoming Call.. ” to inform user when Dynamix DW - Phone
LP-201 VoIP has both IP and PSTN side incoming calls.
3. If in communication with IP side, user can press HOLD to hold IP side, then press
PSTN to pick up PSTN side, after that can press HOLD again to retrieve IP side.
4. If in communication with PSTN side, user must hang up PSTN side before pick up
IP side.
♦ HOLD: To hold a call with H.450 function.
♦ SPEED: Press SPEED and number (Phone book index) to do speed dial according to
phone book data (please refer to LCD configuration-Phone Address Book or Advanced
Configurations via Telnet- [pbook] command).
♦ FORWARD: Forward an incoming call to another IP device by H.450 forward function.
(Please refer to LCD configuration-Indicate Forward Type)
5