User manual

Dynamix DW-Phone LP-201 VoIP Phone

8. -maxdealy:set maximum delay of jitter buffer(0~150)

Note: It is for advanced administrator use only. Please ask your distributor

before changing any settings of this command.

14. [rbtone] command

1. -print: display rbtone information and configuration.

2. -mode: set ring back tone generation mode. 0 means Dynamix DW - Phone LP-

201 will always wait remote site sending ring back tone, 1 means Dynamix DW -

Phone LP-201 will automatically detect if Dynamix DW - Phone LP-201 needs to

generate ring back tone, 2 means Dynamix DW - Phone LP-201 will always play

local ring back tone.

15. [tos] command

TOS/DiffServ (DS) priority function can discriminate the Differentiated Service

Codepoint (DSCP) of the DS field in the IP packet header, and map each Codepoint to

a corresponding egress traffic priority. As per the definition in RFC2474, the DS field is

Type-of-Service (TOS) octet in IPv4. The recommended DiffServ Codepoint is defined

in RFC2597 to classify the traffic into different service classes. The mapping of

Codepoint value of DS-field to egress traffic priorities is shown as follows.