User manual

Dynamix DW-Phone LP-201 VoIP Phone
12. –rtp: assign RTP port number(1024-65535). Dynamix DW - Phone LP-201 need 2
RTP ports for voice communication, the port number assigned here is a base, for
example, default value is 16384, that means VoIP will use port 16384 and 16385 for
RTP packets.
- –ttl: set RAS TTL time (0-3600 second). Dynamix DW - Phone LP-201 will keep re-
registering to GK before TTL timed.
13. –gkfind: assign Gatekeeper finding port number(1024-65535)
14. –ras: assign Gatekeeper RAS port(1024-65535)
15. –range: assign dynamically allocated port range(1500-65535)
16. –respto: set max waiting time for first response to a new call. After dial phone
number without getting response in max waiting time, user will hear busy
tone.(1-200 seconds)
17. –connto: set max waiting time for call establishment after receiving first response of
a new call (1-20000 seconds).
18. –q931: assign Q.931 port for call signaling.
19. –ras: assign RAS port.
Note: 1.Items from 9-20 are for advanced user only.
2.In Peer-to-Peer mode, h323 –print will only display e164, alias,
mode, RTP port, and allocated port range.
3.In P2P mode, please dial “#” after press IP address (ex.10.1.1.1
please dial 10*1*1*1#) or e.164 of Phone book (Please refer to
chapter 4.9 [pbook] command).
56