User manual

Dynamix DW-Phone LP-201 VoIP Phone
13. [h323] command
1. –print: display H.323 stack information and configuration.
2. –mode: configure Dynamix DW-Phone LP-201 as Gatekeeper or Peer-to-Peer
Mode. Usage: h323 –mode 0/1(0 for Gatekeeper mode, 1 for Peer-to-Peer
mode)
3. –gk: set Main Gatekeeper IP address(h323 –gk “xxx.xxx.xxx.xxx”) or URL
address( Domain Name Server must be configured. Please refer to 4.6 [ifaddr]
command). User can set IP as 255.255.255.255 and let Dynamix DW - Phone LP-
201 IP Phoneauto discovery for Gatekeeper. Please notice in this case that user
must enable Gatekeeper
discovery function. Please refer to 6. -gkname and 11.-gkdis.
4. –dfgw: to set IP address of default gateway, this function is the same as Microsoft
NetMeeting.
A. To implement this feature both calling and called endpoints must be under
peer-to-peer mode.
B. If the called party is FXO products, such as WellGate 38xx, which Have to
set sysconf –2nddial 0 to make one-stage dialing.
 Dial remote PSTN number under default gateway, Dynamix DW -
Phone LP-201 VoIP will automatically dial to default gateway, then
default gateway will dial this number to PSTN side.
 For example, user wants to dial to ext.888 under WellGate 38xx,
user only have to dial 888 from IP Phone.
C. If called party are FXS products such as WellGate 35xx : user can
dial line number of WellGate 35xx from IP Phone.
 For example ,user wants to dial to WellGate 3502，the configuration
of 3502 is h323 –line1 101/201 –line2 102，user can press 101/201
or 102 dialing to line1 or line2 of WellGate 3502.
54