User manual

Dynamix DW-Phone LP-201 VoIP Phone

this time. (ddns –delay 1-59m/1-24h , m means minute, h means hour)

10. –force: to force to execute DDNS update. Once user enters this command,

Dynamix DW - Phone LP-201 VoIP will update DDNS data immediately. (ddns –

force “IP address of IP Phone”)

Note:

1. For now we only support DDNS server as www.dyndns.org and www.3322.org.

2. User must register to DDNS server first, and specify user name and password in ddns

-id and ddns –passwd.

3. The default IP address of DDNS login server is member.dyndns.org and

members.3322.org.

4. User has to specify domain name applied for Dynamix DW - Phone LP-201 VoIP in ddns

–hostname.

5. The default IP address of check IP server in is checkip.dyndns.org.

11. [pppoe] command

1. -print: display system overall information and configuration. IF Dynamix DW -

Phone LP-201 VoIP has already connected to PPPoE server, user can see IP

address and related information with this command.

2. -dev: to enable or disable PPPoE function.(pppoe –dev 0/1)

3. –open: to open PPPoE connection(If Dynamix DW - Phone LP-201 VoIP is not in

PPPoE connection, user can try to connect with pppoe -open)

4. –close: to close PPPoE connection(If Dynamix DW - Phone LP-201 VoIP is in PPPoE

connection, user can disconnect with pppoe -close)

5. –id: to set PPPoE authentication user name.

6. –pwd: to set PPPoE authentication password.

7. –reboot: If user enable this function, after PPPoE being disconnected, Dynamix

DW - Phone LP-201 VoIP will automatically reboot to re-connect, and after reboot, if

Dynamix DW - Phone LP-201 VoIP still can’t get contact with server, Dynamix DW -

Phone LP-201 VoIP will keep trying to connect. After re-connected, VoIP will also

restart system. On the other hand, if user disables this function, VoIP won’t reboot

and keep trying to connect. (pppoe –reboot 0/1)