User manual

Dynamix DW-Phone LP-201 VoIP Phone
10. [ddns] command
This function is for Dynamic Domain Name Server service. Once user register to one
DDNS server, he can specify domain name for the IP Phone. When Dynamix DW -
Phone LP-201 VoIP reboot, it will automatically update it’s IP address to DDNS server.
In this way, even Dynamix DW - Phone LP-201 VoIP is using dynamic IP address,
other endpoint can locate this Dynamix DW - Phone LP-201 VoIP by
its domain name.
1. -print: display DDNS overall information and configuration.
2. –enable: to enable/disable DDNS function.(ddns –enable 0/1, 0 for disable and 1
for enable).
3. -server: to set IP address of DDNS login server. (Now only one DDNS server is
available---www.dyndns.org)
4. -hostname: to set the registered Domain Name of IP Phone. (Ex.
ddns –lp001.ddns.org)
5. –id: to set login ID of registered account to log in DDNS server.
6. –passwd: to set password of registered account to log in DDNS server.
7. –checkip: to enable/disable check IP function. If Dynamix DW - Phone LP-201 IP
Phoneis behind IP sharing, when this function is enabled, Dynamix DW - Phone LP-
201 IP Phonewill check it’s public IP address by asking IP address check server and
send to DDNS server to update DDNS data. If this function is disabled, when Dynamix
DW - Phone LP-201 VoIP is behind IP sharing, it will send it’s private IP address to
DDNS server.
8. -checkipsrv: to set IP address of IP address check server.
9. -delay: to set the update interval time. Dynamix DW - Phone LP-201 VoIP will re-
update its IP address in
51