User manual

Dynamix DW-Phone LP-201 VoIP Phone
Chapter
4 Configuring the Dynamix DW-Phone LP-201 through
Telnet command lines
After initializing the Dynamix DW-Phone LP-201 VoIP IP Address setting (please refer
to LCD Configuration: 1.Connect Configuration), user can enter into configuration mode via
telnet.
Note:
1. After user enter LAN Phone configuration via telnet, please use login: ”root”,
password: null, press enter to enter command line.
2. Each command user must key-in with lower case, but contents of configurations
such as h.323 alias or user name etc, user can set as capital case.
3. User who changes any configuration needs to do the commit command then
reboot command.
1. [help] command
Type help or man or ? to display all the command lists. The following figure is shown
all commands of Dynamix DW-Phone LP-201 .
46