User manual

Dynamix DW-Phone LP-201 VoIP Phone
6. Voice Configure
Please refer to chapter 4.14 [voice] command
- Codec Priority: set codecs priority in order. Please notice that user can set from 1 to
7 codecs as their need. For example, user can only set first priority as G.723.1, and
set the others as x, that means only G.723.1 is available.
- Sending Packet Size: User can set different packet size for each codec. (For
Advanced User)
- G.723 Silence Suppression: Enable / Disable sound compression and comfort noise
generation. It is only for codec G.723.1 (For Advanced User)
- Volume: Adjust the volume in “Voice” (sending out); “Input” (receiving); “ DTMF”
(DTMF sending out). Please Noted the value is limited.
- Echo Cancel: Enable / Disable (suggested always Enable this function).
- Jitter Buffer: Min. Delay and Max. Delay (For Advanced User)
35