User manual

Dynamix DW-Phone LP-201 VoIP Phone

4. PPPoE Configure

Please refer to chapter 4.11[pppoe] command

- Device: Enable/Disable PPPoE function

- User Name: Set PPPoE authentication User Name.

- Password: Set PPPoE authentication password.

- Reboot After Remote Host Disconnection: Enable/Disable auto reboot after PPPoE

disconnection

If user enables this function, after PPPoE being disconnected, VoIP will

automatically reboot to re-connect, and after reboot, if VoIP still can’t get

contact with server, Dynamix DW - Phone LP-201 VoIP will keep trying to connect.

After re-connected, Dynamix DW - Phone LP-201 VoIP will also restart system.

On the other hand, if user disables this function, Dynamix DW - Phone LP-201

VoIP won’t reboot and keep trying to connect.

- Other items: After PPPoE connection established, related information will be

displayed