User manual

Dynamix DW-Phone LP-201 VoIP Phone

3. System Configure

Please refer to chapter 4.12 [sysconf] command

- Keypad Type: set DTMF type. User can select DTMF type Dynamix DW - Phone LP-

201 VoIP receive and

transmit.

- Dial Plan: Set dialed DTMF digit limitation (0 is for any digits)

It is for setting dial-numbering plan. While user will dial out e164 number only for

three digits, the plan can be set as 3. Once input 3 digits, LAN Phone will

immediately dial out. The plan 0 is for any possible digits use, when after inter digit

timed, Dynamix DW - Phone LP-201 VoIP will dial out the number no matter how

many digits user input.

Note: Before change to Peer-to-Peer mode from GK mode, please remember to

set dial plan as 0, or it may works not normally in P2P mode.

- The Duration of Two Pressed Digits: Set the DTMF inter digit time (second)

To set the duration (in second) of two pressed digits in dial mode as timed out. If

after the duration user hasn’t pressed next number, LAN Phone will dial out all

number pressed.