User manual

Dynamix DW-Phone LP-201 VoIP Phone
- IP Address: Set IP Address of IP Phone
- Subnet Mask: Set the Subnet Mask of IP Phone
- Default gateway: Set Default routing gateway of IP Phone
- Domain Name Server: Set Domain Name Server IP address.
User can set Domain Name Server IP address. Once Dynamix DW - Phone LP-201
VoIP can connect with DNS server, user can specify URL address instead of IP
address for Gatekeeper and phone book IP address. (Please refer to 4.13 [h323]
command and 4.9 [pbook] commands)
- SNTP: Enable / Disable the Simple Network Time Protocol function
- SNTP Server Address: Set SNTP Server Address
When SNTP server is available, enable Dynamix DW-Phone LP-201 SNTP function
to point to SNTP server IP address so that Dynamix DW - Phone LP-201 VoIP can
get correct current time.
- GMT: Set time zone for SNTP Server time
User can set different time zone according to the location of LAN Phone. For
example, in Taiwan the time zone should be set as 8,which means GMT+8.
- IP Sharing: Enable it if Dynamix DW - Phone LP-201 VoIP is behind IP Sharing
router.
- IP Sharing Server Address: Set Public IP Address of IP Sharing router if it is a fixed
one.
- IP Change Feature: enable/disable IP change Function
Note:
1. If user uses NAT device which supports multiple public IP address, and
Dynamix DW - Phone LP-201 VoIP enables IP change function, Dynamix DW
- Phone LP-201 VoIP will register to Gatekeeper with the public IP Dynamix
DW - Phone LP-201 VoIP uses but not the IP NAT uses.
2. If IP Phone is behind an IP-sharing, user must enable IP sharing function.
3. If public IP address of NAT is fixed, please set the address in columns of IP
Sharing Server Address, if it is dynamic, Dynamix DW - Phone LP-201 VoIP
must register to specific vendor of GK and no need to set IP Sharing Server
Address. Please contact with your vendor for more information.
- Web Configure Server Port: set http port for configuration via web browser
User can configure Dynamix DW - Phone LP-201 VoIP via web browser, default
http port is 80, if port 80 is not available or user has more than 1 Dynamix DW -
Phone LP-201 VoIP и behind NAT, http port can be changed to another available
port.
27