User manual

Dynamix DW-Phone LP-201 VoIP Phone
2. User Line Number
User has to identify at least one number for the Dynamix DW-Phone LP-201 to
register to the Gatekeeper. User can set up to 10 different numbers for one IP
Phone.
(1) Line Number 1
(2) Line Number 2
(3) Line Number 3
(4) Line Number 4
(5) Line Number 5
(6) Line Number 6
(7) Line Number 7
(8) Line Number 8
(9) Line Number 9
(10) Line Number 10
Note: User can set six zero “000000” on LCD to disable this number and the
number after this one. Ex. Line Number 1-5 is configured, if user set Line 3 as
“000000”, Line number 3-5 will be disabled and user will see x displayed on
LCD.
3. Ring Configuration
(1) Ring Style Selection
There are three tone styles for Dynamix DW-Phone LP-201 . Move the “ → ”
symbol by press ³ or ´ on the keypad to select the tone style preferred,
then press OK to confirm it.
Choose Tone Style:
Low Middle High
(2) Ring Volume Control
User can adjust ring volume by press ³ or ´ on the keypad to decrease
or increase volume.
4. Indicate Forward Type
There are two selections to activate or deactivate forward function. After selection
please press OK
(1) Activate: choose under which situation to forward call to another endpoint.
After selection please press OK, then enter LINE NUMBER of another
endpoint prepared to forward to.
18