User manual

Dynamix DW-Phone LP-201 VoIP Phone
2.LCD Configuration
User can set the following configurations manually by operating the commands
displayed on LCD.
1. System Configuration (mandatory, protected by password)
 Please Enter Password:
User must key in password to enter this menu, selections under this
command are all important ones, which can only be configured by
administrators.
Note:
1.Password to enter System Configuration:
The same as H.323 token password (please refer to item (11)), default value is x.
(Please press TRANSFER button to switch as lowercase characters first, then
press 9 twice.)
2.If user forget password, please contact with our company, we will generate a specific
password according to your MAC address of IP Phone.
3.User can also try to configure Dynamix DW - Phone LP-201 VoIP via Telnet or Web
browser with default IP address: 10.1.1.3.
1. Connect Configuration
It is necessary for user to set sub-configurations included in Connect
Configuration in order to run the Dynamix DW-Phone LP-201 correctly.
In addition, user has to prepare one valid IP Address to meet your
network environment. (Global public IP Address or Virtual IP Address)
(1) IP address
In this configuration mode, user presses the prepared IP Address on the
Dynamix DW - Phone LP-201 IP Phonekeypad. Please input IP address as
format: xxx.xxx.xxx.xxx.
(2) Subnet Mask:
User has to press the subnet mask IP Address on the Dynamix DW - Phone
LP-201 IP Phonekeypad.
(3) Gateway
User has to press the default gateway IP that meets IP Address on the
Dynamix DW - Phone LP-201 IP Phonekeypad.
(4) Primary DNS
User can set IP address of Domain Name Server, then for Gatekeeper and
Phone book can enter URL address or IP address. Please refer to 4.9
[pbook] and 4.13 [h323] command.
14