User Manual

Dynamite Vision LED AC/DC Charger
www.DynamiteRC.com 3
Product Support
For technical assistance with this product,
please contact the appropriate Horizon Product
Support ofce. See page 10.
Specications
Input: AC 110 to 240V DC 11.5 to 15V
Battery Type: Ni-Cd or Ni-MH
Battery Cell: Ni-Cd/Ni-MH; 4- to 8-Cell
(4.8V to 9.6V)
Charge Rate: 1.5A, 3A or 5A selectable
Charging Capacity: 1500 to 10000mAh
Trickle Charge Rate: 1/16 Fast Charge Rate
Output Wattage 40W
CAUTION: Attempting to charge
batteries different than those specified in
this manual can result in excessive heat and
other related product malfunctions, which
can lead to user injury or property damage.
Please contact Horizon Hobby or an
authorized retailer with compatibility
questions.
Features
Setup mode and write memory.
DC input reversed polarity protection.
Battery Pack reversed polarity protection.
Internal Safe-Time: 120 minutes.
LED Functions
Standby: Cell LED on and Charge Rate ashing
(slow)
Error: All LEDs ash together (quick)
Incorrect input voltage (below 11.0V or above
15V): Charge Rate LED ashes (quick)
Charge: Charge Rate LED and cell LED on,
Charge level last step ashes (slow)
Charge complete: Charge level green LED solid
on
Boost: Charge level green LED ashes (quick)
Buzzer Functions
Power on reset: 3 times (short)
Switches operation: 1 time (short)
Switches operation error: 2 times (short)
Error (battery short, reversed polarity, charger
error, wrong battery type): 10 times (short)
Boost end: 1 time (long)
Peak full: 3 times (long)
Safe-Time full: 4 times (long)
Ni-MH & Ni-Cd Maximum Voltage
full: 5 times (long)
To reset error, press the Mode button.