User Manual

Dynamite Vision LCD AC/DC Charger
www.DynamiteRC.com 7
Charge Time (in minutes):
Battery Capacity:
Charge Current:
Battery Voltage:
Peak Voltage:
Note: The peak voltage will represent
the maximum battery voltage during the
charge cycle. The peak voltage will be
available for viewing during and after the
charge period is complete
Important: The battery must be
left connected to review the battery
information after the charge cycle.
Once the battery is disconnected, the
information regarding the battery will be
lost.
WARNING: If at any time during
the charge process the battery pack(s)
become hot (over 140 degrees F), unplug
the battery immediately and discontinue
the charge process.
CAUTION: Never re-peak a warm
battery as the overcharging can damage the
products and possibly the user.
NOTICE: Check with the battery
manufacturer to ensure re-peaking is
possible. Failure to follow correct peaking
procedure could cause damage to both the
charger and battery packs.