User Manual

Dynamite Vision LCD AC/DC Charger
www.DynamiteRC.com 5
DYN5008
Charge Adapter Banana: EC5 Female
DYN5010
12V DC Power Adapter with Cig Plug
Setup and Use
AC POWER
To power your charger, connect the AC power
cord into a standard 110V wall outlet.
NOTICE: Always consult 12V battery
collateral materials or Horizon Hobby
before using with sources other than
standard 110V AC wall outlet.
DC POWER
If you power the charger by using DC power,
connect the red (positive) end of the alligator
clips to the red terminal of the DC power
source and the black (negative) end of the
alligator clips to the black terminal of the DC
power source.
NOTICE: Always make sure that you
follow proper polarities at all times.
CAUTION: Never connect the AC
and DC input cords to an active power
source at the same time. This will void the
warranty, cause product damage and
possibly injure the user.
CAUTION: If you choose to power
your charger with an automobile battery,
never do so with the automobile running
as fluctuation in power can cause product
malfunction and possibly injury.
NOTE: If using an automotive battery as a
power source, do not run the engine.
It takes approximately 3 seconds for
the charger to power up when power is
applied.