User Manual

Dynamite Vision LCD AC/DC Charger
www.DynamiteRC.com 3
Product Support
For technical assistance with this product,
please contact the appropriate Horizon Product
Support ofce. See page 10.
Specications
Input: AC 110 to 240V DC 11.5 to 15V
Battery Type: Ni-Cd/Ni-MH
Battery Cell: Ni-Cd/Ni-MH; 1- to 8-Cell
(1.2 to 9.6V)
Charge Rate: 0.1A–5.0A (0.05A Per gradation)
Charging Capacity: 150 to 10000mAh
Trickle Charge Rate: 1/16 Fast Charge Rate
Output Wattage: 40W
CAUTION: Attempting to charge
batteries different than those specified in
this manual can result in excessive heat and
other related product malfunctions, which
can lead to user injury or property damage.
Please contact Horizon Hobby or an
authorized retailer with compatibility
questions.
Features
DC input reversed polarity protection.
Battery Pack reversed polarity protection.
Internal Safe-Time: 900 minutes, suitable for small
charge rate.
LED Functions
Standby: No LEDs.
Standby and Setup charge rate: Red LED/Green
LED ash together.
Error: Red LED/Green LED ash alternately.
Charge: Red LED Solid ON.
Charge Complete: Green LED Solid ON.
Buzzer Functions
Power on reset: 3 times (short)
Switches operation: 1 time (short)
Switches operation error: 2 times (short)
Error (battery short, reversed polarity, charger
error, wrong battery type): 10 times (short)
Boost end: 1 time (long)
Peak full: 3 times (long)
Safe-Time full: 4 times (long)
Ni-MH & Ni-Cd Maximum Voltage
full: 5 times (long)
To reset error function, press the “Mode” switch.