Vision LCD AC/DC Charger Operation Manual www.DynamiteRC.
This is a sophisticated hobby product and NOT a toy. It must be operated with caution and common sense and requires some basic All instructions, warranties, and other mechanical ability. Failure to operate this collateral documents are subject to change Product in a safe and responsible manner could at the sole discretion of Horizon Hobby, Inc. result in injury or damage to the product or For up to date product literature, visit http:// other property. This product is not intended for www.horizonhobby.
Product Support For technical assistance with this product, please contact the appropriate Horizon Product Support office. See page 10. Specifications Input: AC 110 to 240V DC 11.5 to 15V Features DC input reversed polarity protection. Battery Pack reversed polarity protection. Internal Safe-Time: 900 minutes, suitable for small charge rate. LED Functions Battery Type: Ni-Cd/Ni-MH Standby: No LEDs. Battery Cell: Ni-Cd/Ni-MH; 1- to 8-Cell (1.2 to 9.
Available Charge Cords and Adapters The Vision LCD includes the Tamiya style charge cord (DYN5005). Dynamite offers charge cords and adapters for all your battery charging requirements. See the list below to order additional connectors.
DC POWER If you power the charger by using DC power, connect the red (positive) end of the alligator clips to the red terminal of the DC power source and the black (negative) end of the alligator clips to the black terminal of the DC power source. DYN5008 Charge Adapter Banana: EC5 Female NOTICE: Always make sure that you follow proper polarities at all times. CAUTION: Never connect the AC and DC input cords to an active power source at the same time.
Battery Capacity Charge Rate Charge Time* 600mAh 0.6A 60–80 Min. 1300mAh 1A 78–94 Min. 1800mAh 1.8A 60–80 Min. 3300mAh 3.3A 60–80 Min. * Charge times based upon a fully discharged battery. 2. Choose the appropriate connector to fit your battery plug. Connect the red banana plug to the red (+) positive terminal on the front of the charger and the black banana plug to the black (-) negative terminal. NOTICE: Always make sure that you follow proper polarities at all times. 4.
Charge Time (in minutes): Battery Capacity: Peak Voltage: Note: The peak voltage will represent the maximum battery voltage during the charge cycle. The peak voltage will be available for viewing during and after the charge period is complete Important: The battery must be Charge Current: left connected to review the battery information after the charge cycle. Once the battery is disconnected, the information regarding the battery will be lost.
OTHER WARNINGS AND PRECAUTIONS Failure to exercise caution while using this product and comply with the following warnings could result in product malfunction, electrical issues, excessive heat, FIRE, and ultimately injury and property damage. Horizon Hobby if the product malfunctions. • Always keep batteries and charger away from any material that could be affected by heat (such as ceramic and tile), as they can get hot.
Warranty and Repair Policy Warranty Period Exclusive Warranty- Horizon Hobby, Inc. (Horizon) warranties that the Products purchased (the “Product”) will be free from defects in materials and workmanship for a period of 5 year from the date of purchase by the Purchaser. 5 Year Limited Warranty Horizon reserves the right to change or modify this warranty without notice and disclaims all other warranties, express or implied.
Warranty Services Questions, Assistance, and Repairs Your local hobby store and/or place of purchase cannot provide warranty support or repair. Once assembly, setup or use of the Product has been started, you must contact Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please direct your email to productsupport@horizonhobby.com, or call 877.504.
United States: Electronics and engines requiring inspection or repair should be shipped to the following address: Horizon Service Center 4105 Fieldstone Road Champaign, Illinois 61822 USA All other Products requiring warranty inspection or repair should be shipped to the following address: Horizon Product Support 4105 Fieldstone Road Champaign, Illinois 61822 USA Please call 877-504-0233 or e-mail us at productsupport@horizonhobby.com with any questions or concerns regarding this product or warranty.
©2010 Horizon Hobby, Inc.
