User Manual

2
Thank you for purchasing the Dynamite
®
Prophet
™
Charger.This
7.2-8.4V Sub-C charger uses a unique peak prediction circuitry
that ensures an accurate charge every time and protects your
Ni-Cd and Ni-MH batteries from the dangers of over-charging.
This charger continually monitors the battery’s charge curve
and predicts when the peak will occur (100% charge), and
then stops fast-charging at exactly that point.This is essential
in order to avoid damaging Ni-Cd and especially Ni-MH cells,
which are very sensitive to heat. This circuitry is superior to
conventional peak detection circuitry that continues to fast-
charge, even after the battery is fully charged, which can
damage Ni-Cd and Ni-MH cells.
After the battery pack has peaked, the charger automatically
switches to Advanced Trickle Charge.This charging process
keeps your battery packs in top performing
condition until you are ready to use them.
Your charger will have to be powered by connecting it to a
12V power source, such as a 12V Sealed Battery (HAN102)
or automobile battery. If you choose to power your charger
by connecting it to your automobile battery, the car m
ust not
be running!
DC Power
Attach the red (positive) alligator clip to the red (positive)
terminal on your 12V battery. Next, attach the black (negative)
alligator clip to the black (negative) terminal.
Introduction
DC Peak Prediction Charger Features
• Charges 6- or 7-cell
Ni-Cd or Ni-MH Sub-C
car packs
• LED and beeper indicate
when charge is complete
• Limited 5-year warranty
• Advanced Peak
Prediction Circuitry
• 4.0-amp charge rate
• 12V input
• Advanced Trickle Charge
• Heavy-duty alligator clips
• Tamiya-style connector
Supplying Power to the Charger