P RO P H ET DC Peak Prediction Charger For 7.2–8.
Introduction Thank you for purchasing the Dynamite® Prophet™ Charger. This 7.2-8.4V Sub-C charger uses a unique peak prediction circuitry that ensures an accurate charge every time and protects your Ni-Cd and Ni-MH batteries from the dangers of over-charging. This charger continually monitors the battery’s charge curve and predicts when the peak will occur (100% charge), and then stops fast-charging at exactly that point.
Charging 6- or 7-Cell Sub-C Ni-Cd or Ni-MH Battery Packs 1. Properly connect the charger to a 12V power source. 2. Connect the battery to the charger. The charge process will begin automatically. Note: When you connect the charger to a power source, the charger will beep. The charger also beeps when a battery has been successfully connected. The LED will illuminate to indicate the battery is charging. Once the battery has peaked, the LED will flash, and the charger will beep repeatedly.
Warranty and Repair Policy This charger is guaranteed against workmanship and manufacturing defects for a period of 5 years from the original date of purchase. This warranty is limited to the original purchaser and is not transferable. Warranty repair will not cover units that have been modified, misused, or serviced by an unauthorized service center. To speak to a service technician, call 1-877-504-0233.
