User Manual

15
SCAN TO GO
Using the Dynamite Dashboard App, the Passport P2 can be automatically set with
the SCAN TO GO feature by scanning a compatible QR code. Check your battery for
a compatible QR code. If you need to add one, a QR code can be generated from
within the Battery Memory section.
HOW TO GENERATE A QR CODE:
1. Add battery memory settings to match your battery.
2. Touch the QR code next to the battery memory, save it to the Gallery on your device.
3. Print the QR code and apply it to your battery.
Example settings shown, the app does not include any pre-
HOME PROGRAM SYSTEM
LiPo BAL. CHARGE
cells:3 Current:2.0A Voltage:4.20V
LiPo BAL. CHARGE
cells:6 Current:10.0A Voltage:4.20V
LiHV BAL. CHARGE
cells:4 Current:4.0A Voltage:4.35V
LiFe BAL. CHARGE
cells:2 Current:1.3A Voltage:3.6V
Battery
Type
HOME PROGRAM SYSTEM
LiHV
NiMH
NiCd
PB
3
4
5
6
7
8
SCAN TO GO
Battery
Cells
Operation
Mode
NEXT
CYCLE
DISCHARGE
CHARGE
confi gured memory settings.
HOW TO USE A QR CODE:
1. Touch the SCAN TO GO button from the HOME screen in the Dynamite
Dashboard App.
2. The camera will open on your device, use this to scan the QR code.
3. When the QR code is scanned it will apply the parameters, press START to