User Manual

ManualsBrandsDynamite ManualsHobbyPassport Duo 400W Dual AC/DC Charger

DYN4300 Firmware upgraDe

InstructIon Manual (DYn4300)

In order to run this program, ensure dotNetFx4.0 runtime is installed on your computer.

1. Start the software program.

2. Connect the charger to the computer. Press and hold the ENTER button on the front panel of charger DYN4300 and turn on the power switch of the charger, the

charger will enter UPDATE mode.The charger screen will display the following.

The left channel has been used for this exampe.

3. Click LOAD BOOT FILE and then UPDATE to update the boot loader.

The Boot Version will be 1.0 and display the following.

4. When the UPDATE progress is ﬁnished, click LOAD APP FILE and then

UPDATE to update the main program.

The Boot Version will be 1.1 and display the following.

When the Upgrade Complete pop-up box is displayed, click OK. The update is completed. Update the right channel with the same steps above.

Click Here to save the DYN4300 Firmware

Summary of content (1 pages)

PAGE 1
DYN4300 Firmware upgrade Instruction Manual (DYN4300) In order to run this program, ensure dotNetFx4.0 runtime is installed on your computer. 1. Start the software program. Click Here to save the DYN4300 Firmware 2. Connect the charger to the computer. Press and hold the ENTER button on the front panel of charger DYN4300 and turn on the power switch of the charger, the charger will enter UPDATE mode.The charger screen will display the following. The left channel has been used for this exampe. 3.