User Manual

EN
5
1. Brake Mode
Thereare8available
options in the brake
mode. These allow
you to choose from
0%,20%,40%,60%,
70%,80%,90%and
100%brakestrength.
Inbrakemode,themotorwillproduce1beep
signifyingbrakemode,followedby1to8
beeps signifying the available options.
1beep–1beep 0%brakestrength
1beep–2beeps 20%brakestrength
1beep–3beeps 40%brakestrength
1beep–4beeps 60%brakestrength
1beep–5beeps 70%brakestrength
1beep–6beeps 80%brakestrength
1beep–7beeps 90%brakestrength
1beep–8beeps 100%brakestrength
(factorydefault)
Once the series of
beeps for the option
you wish to choose
has completed, move
the throttle position to
maximum and release to
neutral. You will receive
a4-beepconrmationof
programming. If at this
time you do not wish
to proceed to the next
function, you can simply
shut the power off to the
ESC.
2. Drag Brake
Mode
Thereare8available
options in the drag
brake mode. These
allow you to choose
from0%,5%,10%,
15%,20%,25%,
30%and80%drag
brake strength.
Indragbrakemode,themotorproduces2
beeps signifying drag brake mode, followed by
1to8beepssignifyingtheavailableoptions:
2beeps–1beep 0%dragbrake
(factorydefault)
2beeps–2beeps 5%dragbrake
2beeps–3beeps 10%dragbrake
2beeps–4beeps 15%dragbrake
2beeps–5beeps 20%dragbrake
2beeps–6beeps 25%dragbrake
2beeps–7beeps 30%dragbrake
2beeps–8beeps 80%dragbrake
3. Throttle Speed
Thereare5available
options in the throttle
speed sensitivity
mode. They are very
soft, soft, standard,
quick, and very quick.
Inthrottlespeedmode,themotorproduces3
beeps signifying throttle speed mode, followed
by1to5beepssignifyingtheavailable
options:
3beeps–1beep verysoftthrottlesensitivity
3beeps–2beeps softthrottlesensitivity
3beeps–3beeps standardthrottlesensitivity
(factorydefault)
3beeps–4beeps quickthrottlesensitivity
3beeps–5beeps veryquickthrottle
sensitivity