User Manual

DYNP5332
DYNP5391
DYNP5392
DYNP5342
DYNP5344
DYNP5345
DYNP5307
DYNP5308
DYNP5393
DYNP5348
DYNP5347
DYNP5395
(PULL START)
DYNP5394
(NON-PULL START)
DYNP5313
DYNP5310
DYNP5315
DYNP5362
DYNP5314
DYNP5334
DYNP5331
DYNP5390
DYNP5324
DYNP5320
DYNP5350
DYNP5321
DYNP5320
DYNP5322
DYNP5320
DYNP5325
DYNP5326
DYNP5320
DYNP5397
DYNP5320
DYNP5318
DYNP5319
DYNP5399
DYNP5398
DYNP5396
DYNP5398
DPS .28XP REAR EXHAUST
Spare Parts Listing
DYNP5307 WRIST PIN CLIPS (2): DPS 21XP/28/28XP
DYNP5308 CONNECTING ROD: DPS 21XP/28/28XP
DYNP5310 FRONT BEARING: DPS 21XP/28/28XP
DYNP5313 COLLET: DPS 21XP/28/28XP
DYNP5314 BACKPLATE w/O-RING: DPS 21/28/28XP
DYNP5315 CARB RETAINER POST: DPS 21XP/28/28XP
DYNP5317 CARB RESTRICTOR 7.5MM: DPS 21XP/28/28XP
DYNP5318 CARB RESTRICTOR 8.5MM: DPS 21XP/28/28XP
DYNP5319 CARB RESTRICTOR 9MM: DPS 21XP/28/28XP
DYNP5320 2&3 NEEDLE CARB O-RING SET:
DPS 21/28/28XP
DYNP5321 HIGH-SPEED ADJ. NEEDLE: DPS 21XP/28/28XP
DYNP5322 HIGH-SPEED NEEDLE HOLDER:
DPS 21XP/28/28XP
DYNP5324 LOW-SPEED ADJ. NEEDLE: DPS 21XP/28/28XP
DYNP5325 FUEL INLET NIPPLE: DPS 21XP/28/28XP
DYNP5326 IDLE SCREW: DPS 21/28/28XP
DYNP5331 CARB BALL LINK/BALL END: DPS 21XP/28/28XP
DYNP5332 HEAD SCREWS 3 X 16MM (4):
DPS 21XP/28/28XP
DYNP5333 BACKPLATE SCREWS 3 X 8MM (4):
DPS 21XP/28/28XP
DYNP5334 ENGINE HEADER SEAL: DPS 21XP/28/28XP
DYNP5342 HEAD SHIM .1MM (3) DPS 28/28XP
DYNP5343 HEAD SHIM .2MM (3): DPS 28/28XP
DYNP5344 PISTON / SLEEVE: DPS 28/28XP
DYNP5345 WRIST PIN: DPS 28/28XP
DYNP5347 REAR BEARING (13X24X6): DPS 28/28XP
DYNP5348 CRANKCASE: DPS 28/28XP
DYNP5350 THROTTLE BARREL: DPS 28/28XP
DYNP5362 PS ONE-WAY BEARING: DPS 28/28XP
DYNP5390 THROTTLE BARREL BOOT: DPS 21XP/28/28XP
DYNP5391 CYLINDER HEAD, BLUE: DPS 28/28XP
DYNP5392 HEAD BUTTON: DPS 28XP
DYNP5393 SLIDE CARBURETOR (2 NEEDLE): DPS 28XP
DYNP5394 SG CRANKSHAFT: DPS 28XP
DYNP5395 SG CRANKSHAFT (W/PS): DPS 28XP
DYNP5396 PS SHAFT: DPS 28XP
DYNP5397 CARB BODY (2 NEEDLE): DPS 28XP
DYNP5398 PULL/SPIN START: DPS 28XP
DYNP5399 PS BACKPLATE/SHAFT/ 1-WAY: DPS 28XP