Instructions for use

DYN6000
DYN6011
DYN6012
DYN6064
DYN6065
DYN6066
DYN6067
DYN6071
DYN6068
DYN6007
DYN6070
DYN6069
DYN6010
DYN6013
DYN0910
DYN6059
DYN6029
DYN6029
DYN6060
DYN6061
DYN6027
DYN6028
DYN6029
DYN6062
DYN6019
DYN6029
DYN6020
DYN6021
DYN6022
DYN6029
DYN6023
DYN6029
DYN6036
DYN6072
DYN6037
DYN6035
DYN6063
DYN6034
DYN6034
Mach 2 .28
DYN6000 Cylinder Head Screw (4): DYN.28
DYN6064 Cylinder Head: DYN .28
DYN6065 Head Button: DYN .28
DYN6066 Head Shim .1mm: DYN .28
DYN6067 Head Shim .2mm: DYN .28
DYN6068 Piston/Sleeve: DYN .28
DYN6069 Wrist Pin: DYN .28
DYN6007 Wrist Pin Clips (2): DYN .28
DYN6070 Connecting Rod: DYN .28
DYN6059 Slide Carburetor (2-needle): DYN .28
DYN6010 Collet: DYN .28
DYN6011 Front Bearing (7X19X6): DYN .28
DYN6012 Rear Bearing (13X25X6): DYN .28
DYN6013 Carb. Ret. Post Set: DYN .28
DYN6071 Crankcase: DYN .28
DYN6072 Crankshaft: DYN .28
DYN6019 High Speed Needle Valve: DYN .28
DYN6020 High Speed Needle Holder: DYN .28
DYN6021 High Speed Needle Washers: DYN .28
DYN6022 Fuel Inlet Nipple: DYN .28
DYN6023 Idle Speed Screw: DYN .28
DYN6060 Carb Body: DYN .28
DYN6061 Throttle Barrel: DYN .28
DYN6062 Low Speed Needle: DYN .28
DYN6027 Throttle Barrel Boot: DYN .28
DYN6028 Carb Ball Link/Ball End: DYN .28
DYN6029 O-Ring Set: DYN .28
DYN6063 Combo Pull/Spin Start Shaft: DYN .28
DYN6034 Combo Pull/Spin Start Assm: DYN .28
DYN6035 PS Bckplte/Shaft/One-Way:DYN .28
DYN6036 P/S Backplate Screw Set (4): DYN .28
DYN6037 P/S One-way Bearing: DYN .28
© 2009 Horizon Hobby, Inc.
Dynamite engines are manufactured in Taiwan and distributed worldwide by:
Horizon Hobby, Inc.
4105 Fieldstone Rd.
Champaign, IL 61822
USA
www.horizonhobby.com
Printed 05/09
15656
Spare Parts Listing