User Manual

DYN6000
DYN6001
DYN6002
DYN6003, 6004
DYN6005
DYN6006
DYN6007
DYN6008
DYN6009
DYN6014
DYN6012
DYN6015
(PULL START)
DYN6016
(NON-PULL START)
DYN6010
DYN6011
DYN6013
DYN6037
DYN6017
DYN0910
DYN6028
DYN6027
DYN6026
DYN6029
DYN6025
DYN6019
DYN6029
DYN6020
DYN6021
DYN6022
DYN6023
DYN6029
DYN6024
DYN6029
DYN6030, 6031, 6032
DYN6035
DYN6034
DYN6033
DYN6034
.21 SG REAR EXHAUST
Spare Parts Listing
DYN6000 Cylinder Head Screw (4): DYN.21
DYN6001 Cylinder Head: DYN .21
DYN6002 Head Button: DYN .21
DYN6003 Head Shim .1mm: DYN .21
DYN6004 Head Shim .2mm: DYN .21
DYN6005 Piston/Sleeve: DYN .21
DYN6006 Wrist Pin: DYN .21
DYN6007 Wrist Pin Clips (2): DYN .21
DYN6008 Connecting Rod: DYN .21
DYN6009 Slide Carburetor (2-needle): DYN .21
DYN6010 Collet: DYN .21
DYN6011 Front Bearing (7X19X6): DYN .21
DYN6012 Rear Bearing 13X25X6): DYN .21
DYN6013 Carb. Ret. Post Set: DYN .21
DYN6014 Crankcase: DYN .21
DYN6015 Crankshaft pull/spinstart: DYN .21
DYN6016 Crankshaft: DYN .21
DYN6017 Backplate w/o-ring
DYN6018 Backplate Screw Set M3X8MM (4): DYN .21
DYN6019 High Speed Needle Valve: DYN .21
DYN6020 High Speed Needle Holder: DYN .21
DYN6021 High Speed Needle Washers: DYN .21
DYN6022 Fuel Inlet Nipple: DYN .21
DYN6023 Idle Speed Screw: DYN .21
DYN6024 Carb Body: DYN .21
DYN6025 Throttle Barrel: DYN .21
DYN6026 Low Speed Needle: DYN .21
DYN6027 Throttle Barrel Boot: DYN .21
DYN6028 Carb Ball Link/Ball End: DYN .21
DYN6029 O-Ring Set: DYN .21
DYN6030 Carb Restrictor 8.5mm: DYN .21
DYN6031 Carb Restrictor 8mm: DYN .21
DYN6032 Carb Restrictor 7.5mm: DYN .22
DYN6033 Combo Pull/Spin Start Shaft: DYN .21
DYN6034 Combo Pull/Spin Start Assm: DYN .21
DYN6035 PS Bckplte/Shaft/One-Way:DYN .21
DYN6036 P/S backplate screw set (4): DYN .21
DYN6037 P/S One-way Bearing: DYN .21
© 2009 Horizon Hobby, Inc.
Dynamite engines are manufactured in
Taiwan and distributed worldwide by:
Horizon Hobby, Inc.
4105 Fieldstone Rd.
Champaign, IL 61822
www.horizonhobby.com
Printed 02/09
15360