User Manual

(EN)

FUEL MIXING PRECAUTIONS AND GUIDELINES

• Only use gasoline mixed with two-cycle engine oil.

• Only use Dynamite

Pre-Mix Two-Cycle Engine Oil

(DYNE4105). Do not use any other kind of oil.

• Always use 92–98 Octane RON (Europe) and 91–93

Octane AKI (US) gasoline.

• Always blend gasoline with two-cycle engine oil at a 14:1

ratio.

• Never use a 40:1, 32:1 or 25:1 gas-oil ratio.

• Never use glow (nitro) fuel.

Gasoline 2-Cycle Engine Oil

14:1

Gasoline : 2-Cycle Engine Oil

1 gallon : 9.5 ﬂ oz

½ gallon : 4.7 ﬂ oz

¼ gallon : 2.4 ﬂ oz

4 liters : 282 ml

2 liters : 141 ml

1 liter : 71 ml

STARTING THE ENGINE

1. Put the standard hex of the starter shaft into the

Spin-Start.

2. Slide your hand under the strap of the starter so that your

index ﬁnger is on the switch at the bottom.

3. Place the machined end of the starter shaft into the

matching hex socket in the back plate of the engine.

4. Holding the starter securely, press the switch and the

engine should turn over and start up. If the engine does

not turn over, it is probably ﬂooded or the battery in the

starter needs to be recharged.

Follow the engine break-in procedure before attempting any

racing or high-performance operation. Use caution when

adding fuel while the engine is running. Do not over ﬁll or

spill fuel outside the tank.