User's Manual

-55-
 Tone setup: Set the incoming call tone, power-on prompt tone, power-off prompt tone, message tone,
and keypad tone.
 Volume: Set the volume of the conversation tone, the ring tone, the keypad tone.
 Alert type: Select ring, vibrate, ring and vibrate, or ring after vibrate mode.
 Ring type: Set the ring type to Single, Repeat or Ascending.
 Extra tone: Activate or deactivate the warning tone, error tone, network connection tone, and
conversation start tone.
 Answer mode: Set whether to answer incoming calls by pressing any key.
After setting all the above items, choose the mode and then select On.
Note: The mobile phone automatically enters the Headset mode when you insert the earpiece.
Note: In standby state, hold the # key to switch to the mute mode. To switch back to the original mode, hold
the # key again.
5.23 Lock keypad
Select this function to lock keypad, to unlock keypad, you need to press right soft key and Space key.
5.24 Power off
Select this function to power off the phone, you need to press end key for 2 to 3 seconds to power on or
power off the phone.