User's Manual

Settings

24
for three times in succession, the phone will be
locked until correct PUK2 code entered, for detailed
operation, please refer to PIN code and PUK code.
Caution：
If you incorrectly input the PUK2 code ten
times in succession, you will not be able to use
SIM card. Please be careful when use this
function.
11.5.3 Privacy
Secured by phone password, the phone will be
protected from other unauthorized users. When
password function has been activated for call
center or messaging, you have to enter correct
password on corresponding main menu or
sub-menu. The defaulted password is “1234”.
11.5.4 Auto keypad lock
After activating this function, the phone will be
locked automatically if the time you set is arrived,
so as to avoid error operations.
 Manual lock keypad: On the Home screen,
press【Left Soft Key】, then press【* Key】to lock
the keypad manually.
 Manual unlock keypad: On the Home screen,
press【Left Soft Key】, then press【* Key】to
unlock the keypad manually.
11.5.5 Lock screen by end-key
Once activated this function, when the backlight is
on, press【End Key】to turn off the backlight and
auto lock the keypad.
11.5.6 Power-on password
You should set the power on password when you
use this function for the first time. After activated
this function, you should input password each time
you switch the phone on.
Caution:
Power on PWD doesn’t have the limitation for
wrongly inputting. Please remember carefully
about the Power on PWD, otherwise, the
phone won’t be switched on normally once
password forgotten.
11.5.7 Guardlock
Guardlock (MSD) is nicknamed as Mobile Phone
Dog. When others illegally use your phone,
information like CELLID of the phone will be