User's Manual

-51-
home PLMN country.
¾ Incoming calls barring
 All calls: Bar all incoming calls. If this option is set, the mobile phone cannot receive any call.
 When roaming: Bar all incoming calls when roaming. If this option is set, the mobile phone
cannot receive any call when roaming outside the home PLMN.
For each call barring option, you can further perform the following operations:
- Activate: Input the call barring code to activate the selected call barring function.
- Deactivate: Deactivate the selected call barring function.
- Query status: Query the network to obtain the current status of the selected call barring function. The
mobile phone will contact the network. A moment later, the network will make a response and send the
results to the mobile phone.
¾ Cancel bar: Cancel all the set call barring functions. To do so, you need to input the barring code
provided by the network operator.
¾ Change barring code: Change the call barring code. To do so, you need to input the old code.
 Line switching: Switch to Line 1 or Line 2. By default, Line 1 is used.
Note: If you choose Line 2, dialing may fail. This depends on the implementation of the network operator.
 Closed user group: This function requires network support. For details, consult the local network
operator.
Note: SIM on the service is required .
SIM2 setup is the same as SIM1 setup.
5.20.1.2 Advanced setup
 Auto redial: Set it to On or Off to enable or disable auto redial. If you set Auto redial to On, the mobile