User's Manual

restart the phone.

2.4.3 Unlocking the SIM card

The PIN 1 (personal identification number) secures your SIM card from

being misused by others. If you have selected this function, you must enter

the PIN1 code each time you turn on the phone so that you may unlock the

SIM card and then make or answer calls. You can deactivate SIM card

protection (see “Safety settings”). In this case, the misuse of your SIM card

cannot be prevented.

 Press the Hang Up key to turn your phone;

 Enter your PIN1 code. Clear the incorrect digits by using the right soft

key and press OK for confirmation. e.g. if your PIN1 is1234, please enter:

1 2 3 4

If you enter incorrect numbers for three times in succession, your SIM

card will be locked and your phone will ask you to enter PUK 1 number.

If you do not know the PUK 1 code, do not try. Instead, contact your

network service provider. See “Safety settings”.

Note: your network service provider sets a standard PIN 1 code (4 to 8

digits) for your SIM card. You should immediately change this number.

See “Safety settings”

2.4.4 Unlocking your phone

To prevent unauthorized use, you can set phone protection. If you

have selected this function, you must draw unlocking pattern each time you

turn on your phone, to unlock the phone and then make or answer calls.

You may clear the unlocking pattern (see Safety settings). In this cause,

the unauthorized use of your phone cannot be protected.

If you forget your phone password, you must contact the retailer or local

authorized service center to unlock the phone.

2.4.5 Connecting to the network

 Once your SIM card is unlocked, your phone searches for available

network automatically

(the screen will show the network searching is underway). If your

phone has found the available network, the name of network

service provider appears at the center of screen.

Note: If “only for emergency calls” appears on the screen, it indicates

that you are beyond the network coverage (service area), and that

you can still make emergency calls depending on the signal

intensity.