User's Manual
8.5.1 Phone Settings
Set the Time/Date and set the display mode of time and date
Schedule - Turn on/off phone at certain times of the day
Set the language of your phone menus
Set preferred input mode – you can select the input mode used for text
messages etc
8.5.2 Security Settings
Phone lock – default is 1234 you can change it to your own passcode for
security.
Autokeypad lock –you can set this to a timing or none – this will allow the phone to
lock the keypad when you are not using it
8.6 Organizer and Alarm
To set the time for the alarm, select Menu > Clock >Alarm time. You can set and edit
up to 5 alarms for the phone.
8.7 FM Radio
There is an FM tuner built into the phone, you can set your favorite FM radio stations,
you can select to tune manually or to auto search for available stations
9. General information
Access codes
1.Security code, supplied with the phone, helps to protect yourphone against unauthorized
use. The preset code is 1234.
2.PIN code, supplied with the SIM card, helps to protect the card against unauthorized use.
Care and maintenance
Your device is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity and all types of liquids or moisture
can contain minerals that will corrode electronic circuits. If your device does get wet, remove the
battery and allow the device to dry completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic
components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the
device.
• Do not paint the device. Paint can clog the moving parts and prevent proper
operation.