User's Manual

Make sure the phone is powered off when inserting /removing SIM card.
3.Charge the battery
1、Connect the charger to a wall outlet.
2、Connect the charger to the phone. The battery indicator bar should start scrolling.
If 'Not Charging' is displayed, wait for a while, disconnect the charger, plug it in again, and retry. If
charging still fails, contact your dealer.
3、When the battery is fully charged, the bar stops scrolling. Disconnect the charger from the
phone and the wall outlet.
4.Switch on or off
Press and hold the end/power key for a few seconds.
Your device has an internal antenna
Note: As with any other radio transmitting device, do not touch the antenna unnecessarily
when the device is switched on. Contact with the antenna affects call quality and may cause the
device to operate at a higher power level than needed. Avoiding contact with the antenna area
when operating the device optimizes the antenna performance and the battery life.
5.Lock the keypad
To lock the keypad to prevent accidental key presses, select Menu, and press quickly; to
unlock, select Unlock, and press #quickly.
6. Special Additional Functions
6.1Bluetooth
Activate Bluetooth:
With this switch you can activate or deactivate the Bluetooth function. Search for hands-free
device: With this feature phones can automatically find free peripheral. (Typically, the default
password is 0000 Bluetooth headset, Bluetooth headset user specific instructions please refer to).
My devices: search for new devices via a Bluetooth device can automatically search and on the
phone screen will display the device name, press the phone prompts matching set. Connection
device: Bluetooth headset together on the menu settings.
Settings:
The machine can be searched: the set is turned on, you can search for other Bluetooth devices to
this unit, set to off, other Bluetooth devices can not find the machine. The local device name: You
can customize the machine's name. Certification Requirements: This setting is turned on, the unit
is searching the Bluetooth password when prompted, this is set to off, the unit is found without
any hints.
Set sound path:
Stay on the phone: When this is selected, the call can only be used when the phone can not use
Bluetooth headset. Go handsfree: When this is selected, only use the Bluetooth headset during a
call, you can not use the phone. My Bluetooth: Show Bluetooth information.
6.2 Bluetooth headset
Bluetooth assisted dialing allows the users to avoid holding a large handset or a tablet to talk
and allows privacy. With the advent of Bluetooth dialing it enables the user ore flexibility with
his communications needs.