User's Manual

automatically switched to till the battery 1 is used up (i.e. the battery 1 is a main power supply).

z Charging: Firstly the battery that is supplying is charged, after charged fully, the other battery is

switched to for charging and supplies.(after the adapter is taken out, return to a state of no charging,

namely, the battery 1 supplies in default).

Note the following cases:

I Switch to the other battery and charge it after the battery being charged is pulled out.

II Conditions that the phone is powered off and charged (requires understanding furthermore).

III Automatically switch to the other battery for power after the battery at supply is taken out.

IV Automatically switch to the other battery when the battery at supply is used up.

V Automatically switch to the battery 1 for power supply when the battery 1 is inserted if merely battery

2 presents.

3.3 Power the phone on/off

z Press and hold [End] to power the phone on under the power-off state

z Press and hold [End] to power the phone off under the power-on state.

3.4 Memory Card

The phone supports the T-Flash card (otherwise purchased), which is a multimedia memory card used

to multiple the memory of the phone. The T-flash card is small and should be pulled out and installed

carefully and prudently in order to avoid in damaging.

1 Open the external cover of the T-Flash card socket.

2 Slide the T-Flash card into its socket.

3 Cover the T-Flash card socket.

3.5 USB Data Cables

This version supports the USB interface. You can connect your phone with the PC via the USB&data

cable, copying or moving the files amid the phone and PC, or browsing the images, record files and

video files saved in the phone via the PC.

1 Insert the USB data cable connector into the USB interface of the phone.

2 Connect the other terminal of the USB data cable with the USB interface of the PC.

3 The phone pops up window with 3 modes at your choice: Mass storage.